Application of self-assembly in polypeptide drugs: a review / 生物工程学报

Self-assembly refers to the spontaneous process where basic units such as molecules and nanostructured materials form a stable and compact structure. Peptides can self-assemble by non-covalent driving forces to form various morphologies such as nanofibers, nano layered structures, and micelles. Peptide self-assembly technology has become a hot research topic in recent years due to the advantages of definite amino acid sequences, easy synthesis and design of peptides. It has been shown that the self-assembly design of certain peptide drugs or the use of self-assembled peptide materials as carriers for drug delivery can solve the problems such as short half-life, poor water solubility and poor penetration due to physiological barrier. This review summarizes the formation mechanism of self-assembled peptides, self-assembly morphology, influencing factors, self-assembly design methods and major applications in biomedical field, providing a reference for the efficient use of peptides.

Preparation and catalytic properties of catalase-inorganic hybrid nanoflowers / 生物工程学报

Catalase is widely used in the food, medical, and textile industries. It possesses exceptional properties including high catalytic efficiency, high specificity, and environmental friendliness. Free catalase cannot be recycled and reused in industry, resulting in a costly industrial biotransformation process if catalase is used as a core ingredient. Developing a simple, mild, cost-effective, and environmentally friendly approach to immobilize catalase is anticipated to improve its utilization efficiency and enzymatic performance. In this study, the catalase KatA derived from Bacillus subtilis 168 was expressed in Escherichia coli. Following separation and purification, the purified enzyme was prepared as an immobilized enzyme in the form of enzyme-inorganic hybrid nanoflowers, and the enzymatic properties were investigated. The results indicated that the purified KatA was obtained through a three-step procedure that included ethanol precipitation, DEAE anion exchange chromatography, and hydrophobic chromatography. Then, by optimizing the process parameters, a novel KatA/Ca3(PO4)2 hybrid nanoflower was developed. The optimum reaction temperature of the free KatA was determined to be 35 ℃, the optimum reaction temperature of KatA/Ca3(PO4)2 hybrid nanoflowers was 30-35 ℃, and the optimum reaction pH of both was 11.0. The free KatA and KatA/Ca3(PO4)2 hybrid nanoflowers exhibited excellent stability at pH 4.0-11.0 and 25-50 ℃. The KatA/Ca3(PO4)2 hybrid nanoflowers demonstrated increased storage stability than that of the free KatA, maintaining 82% of the original enzymatic activity after 14 d of storage at 4 ℃, whereas the free KatA has only 50% of the original enzymatic activity. In addition, after 5 catalytic reactions, the nanoflower still maintained 55% of its initial enzymatic activity, indicating that it has good operational stability. The Km of the free KatA to the substrate hydrogen peroxide was (8.80±0.42) mmol/L, and the kcat/Km was (13 151.53± 299.19) L/(mmol·s). The Km of the KatA/Ca3(PO4)2 hybrid nanoflowers was (32.75±2.96) mmol/L, and the kcat/Km was (4 550.67±107.51) L/(mmol·s). Compared to the free KatA, the affinity of KatA/Ca3(PO4)2 hybrid nanoflowers to the substrate hydrogen peroxide was decreased, and the catalytic efficiency was also decreased. In summary, this study developed KatA/Ca3(PO4)2 hybrid nanoflowers using Ca2+ as a self-assembly inducer, which enhanced the enzymatic properties and will facilitate the environmentally friendly preparation and widespread application of immobilized catalase.

Challenges in the use of nanostructures as carriers of nucleic acids in clinical practice

ABSTRACT The delivery of nucleic acids to cells is considered a crucial step for the success of genetic modifications aimed at therapeutic purposes or production of genetically modified animals. In this context, nanotechnology is one of the most promising fields of science, with the potential to solve several existing problems. Nanostructures have desirable characteristics to be used as carriers, such as nanometric size, large surface area, cell internalization capacity, prolonged and controlled release, among others. Genetically modified animals can contribute to the production of biopharmaceuticals, through the expression of high-associated-value molecules. The production of these animals, also known as biofactories, further enhances Brazilian agribusiness, since it allows adding value to the final product, and favors the integration between the agricultural market and the pharmaceutical sector. However, there is a growing concern about the safety and possible harmful effects of nanostructures, since data on the safe use of these materials are still insufficient. The objective of this review was to address aspects of the use of nanostructures, mainly carbon nanotubes as nucleic acid carriers, aiming at the production of genetically modified animals, with the certainty that progress in this field of knowledge depends on more information on the mechanisms of interaction between nanostructures, cells and embryos, as well as on its toxicity.

Determination of Shear Bond Strength of Nanocomposite to Porcelain and Metal Alloy

Abstract Objective: To compare porcelain and metal repair done with both nanocomposite and conventional composite. Material and Methods: A total of 30 cylinders were fabricated from Porcelain (I), Porcelain fused to metal (II), and metal (III) substrate each. Control group (A) was bonded with conventional micro-hybrid composite and experimental group (B) was bonded with nanocomposite in a 2 mm thickness. All specimens were thermocycled and stored in distilled water at 37 °C for 7 days. A universal testing machine was used to measure the Shear bond strength (SBS). The difference between bond strengths of the groups was compared using an independent t-test. Results: In all three groups, the SBS was higher in the experimental group as compared to the control group. The use of nanocomposite of metal alloy presented maximum shear bond strength, followed by samples of porcelain fused to metal and finally porcelain, showing the lowest values of SBS. Conclusion: Porcelain and alloys bonded with nanocomposite exhibit enhanced adhesiveness as well as aesthetic and mechanical properties. This subsequently would translate into providing higher clinical serviceability and durability and hence a cost-effective and accessible repair option for human welfare (AU).

Peptide-based bioactivated in vivo assembly nanomaterials and its biomedical applications: a review / 生物工程学报

Based on the self-assembly process occurring in the human body all the time, self-assembled nanomaterials were designed by the researchers. The self-assembled nanomaterials have controllability, biocompatibility and functional advantages in vivo. The self-assembled nanomaterials constructed in situ under a physiological environment display various biological characteristics which can be used for imaging, therapy, and broad clinical applications. In situ self-assembled nanomaterials can boost drug function, reduce toxic and side effects, prolong imaging time and enlarge signal-to-noise ratio. By using pathological conditions to trigger specific responses in vivo, well-ordered nanoaggregates can be spontaneously formed by multiple weak bonding interactions. The assembly shows higher accumulation and longer retention in situ. Endogenous triggers for in situ assembly, such as enzymes, pH, reactive oxygen species and ligand receptor interaction, can be used to transform the materials into a variety of controllable nanostructures including nanoparticles, nanofibers and gels through bioactivated in vivo assembly (BIVA) strategies. BIVA strategies can be applied for treatment, imaging or participate in the physiological activities of cells at the lesion site. This review summarized and prospected the design of self-assembled peptide materials based on BIVA technology and their biomedical applications. The nanostructures of the self-assembly enable some beneficial biological effects, such as assembly induced retention (AIR) effect, enhanced targeting effect, multivalent bond effect, and membrane disturbance. Thus, the BIVA nanotechnology is promising for efficient drug delivery, enhancement of targeting and treatment, as well as optimization of the biological distribution of drugs.

Influence of the geometry of nanostructured hydroxyapatite and alginate composites in the initial phase of bone repair

Abstract Purpose: To analyze, histomorphologically, the influence of the geometry of nanostructured hydroxyapatite and alginate (HAn/Alg) composites in the initial phase of the bone repair. Methods: Fifteen rats were distributed to three groups: MiHA - bone defect filled with HAn/Alg microspheres; GrHA - bone defect filled with HAn/Alg granules; and DV - empty bone defect; evaluated after 15 days postoperatively. The experimental surgical model was the critical bone defect, ≅8.5 mm, in rat calvaria. After euthanasia the specimens were embedded in paraffin and stained with hematoxylin and eosin, picrosirius and Masson-Goldner's trichrome. Results: The histomorphologic analysis showed, in the MiHA, deposition of osteoid matrix within some microspheres and circumjacent to the others, near the bone edges. In GrHA, the deposition of this matrix was scarce inside and adjacent to the granules. In these two groups, chronic granulomatous inflammation was noted, more evident in GrHA. In the DV, it was observed bone neoformation restricted to the bone edges and formation of connective tissue with reduced thickness in relation to the bone edges, throughout the defect. Conclusion: The geometry of the biomaterials was determinant in the tissue response, since the microspheres showed more favorable to the bone regeneration in relation to the granules.

Recent advances in layered double hydroxides applied to photoprotection / Recentes avanços dos hidróxidos duplos lamelares aplicados à fotoproteção

ABSTRACT Layered double hydroxides have received more attention from researchers due to their range of applications, ease of synthesis and low cost of production. With broader knowledge about solar radiation effects on the body, the use of sunscreens has become even more important. The ability of some nanostructures, such as layered double hydroxides, to act as matrices has made it possible to obtain improvements in photoprotective formulations, with solutions to problems caused by radiation and sunscreens. This review article brings together the most recent advances of these clays, the layered double hydroxides, applied to photoprotection.

RESUMO Os hidróxidos duplos lamelares vêm ganhando maior atenção de pesquisadores, em decorrência da gama de aplicações, da facilidade de síntese e do baixo custo de produção. Com o crescente conhecimento sobre diversos efeitos da radiação solar sobre o organismo, a utilização de fotoprotetores tem se tornado indispensável. A capacidade de nanoestruturas, como os hidróxidos duplos lamelares, atuarem como matrizes possibilitou melhorias nas formulações fotoprotetoras, tendo em vista os problemas provocados pela radiação, bem como por alguns filtros solares. Este artigo de revisão reúne os avanços mais recentes destas argilas, os hidróxidos duplos lamelares, aplicados à fotoproteção.

Alveolar bone repair with strontium- containing nanostructured carbonated hydroxyapatite

ABSTRACT Objective: This study aimed to evaluate bone repair in rat dental sockets after implanting nanostructured carbonated hydroxyapatite/sodium alginate (CHA) and nanostructured carbonated hydroxyapatite/sodium alginate containing 5% strontium microspheres (SrCHA) as bone substitute materials. Methods: Twenty male Wistar rats were randomly divided into two experimental groups: CHA and SrCHA (n=5/period/group). After one and 6 weeks of extraction of the right maxillary central incisor and biomaterial implantation, 5 μm bone blocks were obtained for histomorphometric evaluation. The parameters evaluated were remaining biomaterial, loose connective tissue and newly formed bone in a standard area. Statistical analysis was performed by Mann-Withney and and Wilcoxon tests at 95% level of significance. Results: The histomorphometric results showed that the microspheres showed similar fragmentation and bio-absorbation (p>0.05). We observed the formation of new bones in both groups during the same experimental periods; however, the new bone formation differed significantly between the weeks 1 and 6 (p=0.0039) in both groups. Conclusion: The CHA and SrCHA biomaterials were biocompatible, osteoconductive and bioabsorbable, indicating their great potential for clinical use as bone substitutes.

Histomorphometric evaluation of strontium-containing nanostructured hydroxyapatite as bone substitute in sheep

Abstract The aim of this study is to evaluate the biocompatibility and osteoconductivity in surgical defects of sheep tibias filled with 1% strontium-containing nanostructured hydroxyapatite microspheres (SrHA), stoichiometric hydroxyapatite without strontium microspheres (HA), or blood clots. Santa Ines sheep were subjected to three perforations on the medial side of the left tibia. The biomaterials were characterized by X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) before implantation and by X-Ray Microfluorescence (µFRX) and Scanning Electron Microscopy (SEM) after sheep tibias implantation. Surgical defects were filled with blood clots (control), SrHA (Group 1) or HA (Group 2). After 30 days, 5-µm bone blocks were obtained for histological evaluation, and the blocks obtained from 1 animal were embedded in methylmethacrylate for undecalcified sections. Mononuclear inflammatory infiltrate remained mild in all experimental groups. Giant cells were observed surrounding biomaterials particles of both groups and areas of bone formation were detected in close contact with biomaterials. All groups showed newly formed bone from the periphery to the center of the defects, which the control, HA and SrHA presented 36.4% (± 21.8), 31.2% (± 14.7) and 26.2% (± 12.9) of newly formed bone density, respectively, not presenting statistical differences. In addition, the connective tissue density did not show any significant between groups. The SrHA showing a higher volume density of biomaterial (51.2 ± 14.1) present in the defect compared to HA (32.6 ± 8.5) after 30 days (p = 0.03). Microspheres containing 1% SrHA or HA can be considered biocompatible, have osteoconductive properties and may be useful biomaterials for clinical applications.

Early onset intellectual disability in chromosome 22q11.2 deletion syndrome / Inicio temprano de discapacidad intelectual en el Síndrome de deleción del cromosoma 22q11.2

Chromosome 22q11.2 deletion syndrome, or DiGeorge syndrome, or velocardiofacial syndrome, is one of the most common multiple anomaly syndromes in humans. This syndrome is commonly caused by a microdelection from chromosome 22 at band q11.2. Although this genetic disorder may reflect several clinical abnormalities and different degrees of organ commitment, the clinical features that have driven the greatest amount of attention are behavioral and developmental features, because individuals with 22q11.2 deletion syndrome have a 30-fold risk of developing schizophrenia. There are differing opinions about the cognitive development, and commonly a cognitive decline rather than an early onset intellectual disability has been observed. We report a case of 22q11.2 deletion syndrome with both early assessment of mild intellectual disabilities and tetralogy of Fallot as the only physic manifestation.

El síndrome del cromosoma 22q11.2, también conocido como supresión o síndrome de DiGeorge o síndrome velocardiofacial, es uno de los síndromes más comunes de anomalías múltiples en los seres humanos. Este síndrome es comúnmente causado por una microdeleción del cromosoma 22 en q11.2 banda. Aunque este trastorno genético muestra varias anomalías clínicas y diferentes grados de compromiso orgánico, las características clínicas que han atraído la mayor atención son el comportamiento y el desarrollo, porque las personas con síndrome de deleción 22q11.2 tienen un riesgo 30 veces mayor de desarrollar esquizofrenia. Hay diferentes opiniones sobre el desarrollo cognitivo, y comúnmente se se ha observado un deterioro cognitivo en lugar de un inicio temprano de discapacidad intelectual. Presentamos un caso de síndrome de deleción 22q11.2 tanto con la evaluación temprana de discapacidades intelectuales leves como con la tetralogía de Fallot como única manifestación física.

Poly (l-lactide acid) improves complete nano-hydroxyapatite bone scaffolds through the microstructure rearrangement

Cracks often occur when nano-hydroxyapatite bone scaffolds are fabricated with selective laser sintering, which affect the performance of scaffolds. In this study, a small amount of poly (l-lactide acid) (PLLA) was added into nano-hydroxyapatite (nano-HAP) powder by mechanical blending in order to improve the sintering properties. The nano-HAP powder combined with 1wt percent PLLA was sintered under different laser power (5W, 7.5W, 10W, 12.5W, 15W and 20W). The fabricated scaffolds were characterized using Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and Micro Hardness Tester. The results showed that nano-HAP particles grew up quickly with the laser power increasing, and there were many strip-like cracks on the surface of sintering zone. The cracks gradually reduced until disappeared when the laser power increased to 15W, together with a great improvement of density. Large pores were observed on the specimen when the laser power further increases, accompanied with the decomposition of HAP into β-tricalcium phosphate (β-TCP) and tetracalcium phosphate (TTCP). And the optimum parameters were eventually obtained with laser power of 15W, scanning speed of 1000 mm/min, powder bed temperature of 150ºC, laser spot diameter of 2 mm and layer thickness of 0.2 mm. We summarized that the molten PLLA enhanced the particle rearrangement of nano-HAP by capillary force and may absorb thermal stress in laser sintering process, while PLLA would be oxidized gradually until completely excluded from the sintered nano-HAP scaffolds, which was confirmed by FTIR analysis. This study provides a novel method to improve the sintering properties of nano-HAP with no adverse effects which would be used in the application of bone tissue engineering potentially.

Clinical trials with nanoparticle composite in posterior teeth: a systematic literature review

Aim: The aim of this article is to evaluate clinical trials with nanoparticle composite in posterior teeth through a systematic review of the literature. Methods: This analysis includes controlled clinical trials with nanoparticle composites, with at least 6 months of evaluation, published in the English language between 1997 and 2009. In vitro and retrospective studies and studies on anterior teeth were excluded. Articles were retrieved from the following full-text electronic journal databases: MEDLINE, LILACS and The Cochrane Library. Results: The largest number of articles was found in the MEDLINE database, but only 4 of them met the inclusion and exclusion criteria. No articles were found in the LILACS database; only two articles were selected from The Cochrane Library databases and they coincided with those already included in MEDLINE. Conclusions: The nanoparticle composites give a satisfactory performance for use in posterior teeth for at least 2 years of functional activity, but their performance was not superior to that of the other composites. Long-term studies must be conducted to evaluate the performance after 2 years of functional activity. New controlled and randomized clinical trials are necessary.

Nano-composition of riboflavin-nafion functional film and its application in biosensing.

A novel nafion-riboflavin membrane was constructed and characterized by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy and cyclic voltammetric techniques. The estimated average diameter of the designed nanoparticles was about 60 nm. The functional membrane showed a quasi-reversible electrochemical behaviour with a formal potential of -562 +/- 5 mV (vs Ag/AgCl) on the gold electrode. Some electrochemical parameters were estimated, indicating that the system has good and stable electron transfer properties. Moreover, horseradish peroxidase (HRP) was immobilized on the riboflavin-nafion functional membrane. The electrochemical behaviour of HRP was quasi-reversible with a formal potential of 80 +/- 5 mV (vs Ag/AgCl). The HRP in the film exhibited good catalytic activity towards the reduction of H2O2. It shows a linear dependence of its cathodic peak current on the concentration of H2O2, ranging from 10 to 300 (micro)M.

Self-assembled surfactant nano-structures important in drug delivery: a review.

Role of self assembled structures as a vehicle is significant over the years. Their applications have been found for all routes of drug delivery. These micro and nano structures are containers loaded with drugs, ideal for targeted and sustained release of the drug. Drug efficacy depends on the drug loaded into the vehicle, temperature, drug solubility, pH, release characteristics, additives and most significantly, the vehicle morphology. This in turn suggests that the same vehicle cannot be used with high efficiency for all types of drugs and locations where the drug delivery has to take place. The status of various self assembled structures and their applications in drug delivery is reviewed in this communication.

Oral poly(lactide-co-glycolide) nanoparticle based antituberculosis drug delivery: toxicological and chemotherapeutic implications.

The present study reports on the detailed toxicological and chemotherapeutic evaluation of antituberculosis drug loaded nanoparticles in mice. A single oral dose administration of poly(lactide-co-glycolide) (PLG, a synthetic polymer) nanoparticles containing rifampicin+isoniazid+pyrazinamide+ethambutol could maintain drug levels in various tissues for 9-10 days and did not elicit any adverse response even when administered at several fold higher than the recommended therapeutic dose. However, dosing with conventional free drugs at the equivalent higher doses was lethal. Despite multiple oral dosing with the formulation at every 10th day, no toxicity was observed on the completion of subacute (28 days) or chronic (90 days) toxicity studies based on survival, gross pathology, histopathology, blood biochemistry and hematology. In mice harboring a high mycobacterial load (mimicking human tuberculosis), two independent chemotherapeutic regimens, i.e. 5 doses of PLG nanoparticles encapsulating (rifampicin+isoniazid+pyrazinamide+ethambutol) administered 10 days apart, or 2 doses of the 4-drug formulation followed by 3 doses of 2-drug formulation (rifampicin+isoniazid) resulted in undetectable bacilli. Further, the efficacy was comparable to 46 daily doses of oral free drugs. Therefore, the experimental evidence suggests that PLG nanoparticle-based antituberculosis drug delivery system is safe and well suited for prolonged and intermittent oral chemotherapy.